BZGJT - 46329 OPAQUE PIGMENTS
- MSDS: BZGJT
- Manufacturer: ENVIRONMENTAL TECHNOLOGY INC
- Product Name: 46329 OPAQUE PIGMENTS
- National Stock Number: 8010-00F047065
Product Identification
Product ID:46329 OPAQUE PIGMENTS
MSDS Date:01/01/1992
FSC:8010
NIIN:00F047065
MSDS Number: BZGJT
Responsible Party
FIELDS LANDING, CA 95537
US
Emergency Phone: 707-443-9323
Info Phone: 707-443-9323
Preparer: DAVE FONSEN
Cage: ENVIR
Contractor
Telephone: 410-321-5200
Cage: ENVIR
Ingredients
POLYESTER LIQUID VEHICLE
Fraction By Weight: 50-90%
DRY PIGMENT POWDER (NON-LEAD)
Fraction By Weight: 10-50%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE MAY CAUSE DIZZINESS,
INCOORDINATION, SLIGHT NAUSEA & LOSS OF APPETITE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, INCOORDINATION, SLIGHT NAUSEA, LOSS
OF APPETITE.
First Aid
First Aid:EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>300F
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:DON'T ENTER CONFINED FIRE SPACE W/O FULL
BUNKER GEAR (HELMET W/FACE SHIELD, BUNKER COATS, GLOVES & RUBBER
BOOTS) & POSITIVE PRESSURE NIOSH APPROVED SCBA.
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE MIXTURE W/AIR.
SEALED CONTAINERS CAN BUILD UP PRESSURE IF EXPOSED TO HEAT.
Accidental Release
Spill Release Procedures:LARGE: REMOVE OPEN FLAMES, SPARKS, HOT
SURFACES & OXIDIZING AGENTS. CONTAIN IF POSSIBLE. WIPE UP/ABSORB ON
SUITABLE MATERIAL, SHOVEL UP & DISPOSE OF PROPERLY. SMALL: TAKE UP
W/AN ABSORBENT MATERIAL & DISPOSE OF PROPERLY.
Handling
Handling and Storage Precautions:STORE IN A CLOSED, PROPERLY LABELED
CONTAINER IN A COOL VENTILATED AREA. KEEP AWAY FROM HEAT & OPEN
FLAMES. DON'T TRANSFER TO UNMARKED CONTAINERS.
Other Precautions:AVOID CONTACT W/SKIN & EYES. EMPTIED CONTAINERS
RETAIN PRODUCT RESIDUE. OBSERVE ALL LABELED HAZARD PRECAUTIONS.
Exposure Controls
Respiratory Protection:WHERE REQUIRED, USE NIOSH/MESA APPROVED
RESPIRATORY PROTECTION.
Ventilation:ADEQUATE TO MAINTAIN EXPOSURE LIMITS BELOW OSHA LIMITS.
Protective Gloves:IMPERVIOUS/NEOPRENE/RUBBER
Eye Protection:SPLASH-PROOF GOGGLES
Other Protective Equipment:SAFETY GLASSES W/SIDES, BODY-COVERING
CLOTHING, SAFETY EQUIPMENT, APRON, FOOTWEAR.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>500F
Vapor Density:>1
Solubility in Water:SLIGHT
Appearance and Odor:THICK COLORED PASTE
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, FLAME
Hazardous Decomposition Products:SMOKE, CO, CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN AN APPROVED CHEMICAL WASTE
LANDFILL/INCINERATE IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.